.jpg)
Partial Vehicle Branding
Professional branded coverage on selected vehicle panels — cast vinyl on the panels that count, original paintwork as part of the finished design.
Product Overview
Partial vehicle branding applies printed cast vinyl graphics to selected panels — doors, sides, bonnet, or rear — while uncovered areas retain original paintwork. Panel selection and edge placement are confirmed at vehicle assessment.
Key Specification Facts
- Film grade: Printable cast vinyl — 3M IJ280 or Avery MPI 1105 Easy Apply RS — specified for curved panel surfaces.
- Panel coverage: Doors, sides, bonnet, rear, or any combination confirmed at brief stage — not defaulted to a standard template.
- Colour integration: Vinyl colour and panel boundaries resolved against the vehicle's actual paint colour at artwork stage.
- DED permit: One Unified Economic Permit per vehicle through TAMM — required regardless of coverage level.
Technical Highlights
- Film Grade: 3M IJ280 and Avery MPI 1105 Easy Apply RS are the specified printable cast films for partial branding panels. Both use repositionable air-release adhesive systems that support application around curves, recesses, and panel features when correctly processed and installed.
- Cast overlaminate as system requirement: Every printed panel is finished with a manufacturer-matched cast overlaminate — 3M 8428G or Avery DOL 1460Z. The overlaminate adds UV and weathering protection, abrasion resistance, and the conformability needed for curved vehicle panels.
- Panel boundary placement: Cut lines are positioned at natural body seams, trim lines, and shut lines rather than across open painted areas. This gives the panel transition a cleaner finish and helps reduce edge-lift risk at exposed boundaries.
Pricing, Lead Time & Warranty
Projects vary by specification, material finish, and site access conditions. The figures below are for budgeting guidance only. Final pricing, lead time, and warranty are confirmed after locking project scope, technical review, and TAMM permit sequencing.
Quoting & Price Ranges
Indicative Price Range in AED
AED 1,450–12,000 per vehicle.
Pricing Factors:
- Vehicle type, size, and panel complexity
- Coverage scope and panel count
- Material system and finish specification
- Surface condition and preparation scope
- Removal of existing branding or adhesive residue
.svg)
Project Lead Time
Lead time for full vehicle branding is confirmed after vehicle assessment, artwork approval, and TAMM permit clearance.
As a general guide:
- Partial branding on a standard sedan: 1–2 days
- Large vehicles or complex bodies: 2–3 days
Removal of existing branding is a different scope and needs additional time allocation.
Warranty and Aftercare
12 Months from Handover
Warranty Coverage Includes
- Material and overlaminate integrity on wrapped panels
- Adhesion and edge stability against installation defects
- Workmanship including alignment, trimming, and edge finishing
- Print quality and colour consistency against approved artwork
Abu Dhabi Project Gallery
Explore completed work across Abu Dhabi, captured on site after delivery to show real materials, finish quality, scale, and how each branding or signage solution performs in actual operating settings.
.webp)
Ideal For
- Service and maintenance fleets attending client sites across Abu Dhabi use door and side panel branding for consistent identification without full exterior coverage.
- Logistics and delivery operators on daily routes across Abu Dhabi residential and commercial zones carry rear and side panel graphics for brand visibility at road speed.
- Mixed-model fleets combining cars, vans, and light trucks maintain consistent brand placement across different chassis types through an adapted partial layout per model.
- Corporate and professional services vehicles attending managed properties and business parks across Abu Dhabi carry panel branding that matches the operating standard of the environment.
.webp)
Business Value
- Brand ten vehicles instead of three: Cast-grade graphics on key visibility panels cost a fraction of full coverage per unit, letting the same budget put branded vehicles across more routes, districts, and client-facing touchpoints.
- Fleet stays earning during installation: Partial coverage completes in 4–8 hours per vehicle — often within a single shift. Full wraps can take two or more days. The difference is measured in lost revenue per unit off the road.
- Damage stays local, not fleet-wide: When a single panel takes impact, only that panel is reprinted and replaced. The rest of the vehicle's branding remains intact and operational — no full-vehicle downtime for a localised incident.
Looking For a Complete Solution?
Full Vehicle Branding
Fleet Lettering & Decals
Truck Branding
Food Truck
Frequently Asked Questions
Will the edge where vinyl meets paint be visible on partial branding?
Yes. Partial vehicle branding creates a visible transition between vinyl and paintwork. Edge placement is resolved at artwork stage along natural body lines — shut lines, mouldings, and panel seams — so the boundary reads as part of the vehicle's geometry.
Can partial branding panels be removed without damaging the paint?
Cast vinyl panels are removable with heat by a qualified installer within the warranty period. Removability is confirmed at brief stage based on paint type, surface condition, and panel history.
Does partial vehicle branding need a DED advertising permit?
Yes. Commercial vehicle graphics in Abu Dhabi require a DED Unified Economic Permit through the TAMM portal — one permit per vehicle regardless of coverage level. Artwork must match the registered trade name on the DED business record exactly.
Does partial branding use a lower material specification than a full wrap?
No. Printed panels on partial vehicle branding use the same cast vinyl system — 3M IJ280 or Avery MPI 1105 with cast overlaminate. Coverage scope changes. Material grade does not.