.jpg)
Custom Glass & Window Vinyl Lettering Abu Dhabi
Precision-cut vinyl lettering and decals for commercial glass. We supply and install custom logos, business hours, and wayfinding graphics across Abu Dhabi with removable adhesive for zero glass damage.
What Window Cut Vinyl Lettering & Decals Covers
Precision-cut sign-cut vinyl for glass covers cut lettering, logos, trading hours, and identity graphics applied directly to shopfront glass, office entrance doors, and internal partitions across Abu Dhabi commercial sites. No background film is used — only the cut character or shape adheres to the glass, leaving the unprinted surface fully open and surrounding glazing undisturbed.
The lead film for long-life exterior glass lettering is Avery 900 Supercast, a 50-micron cast PVC with permanent acrylic adhesive. 3M Scotchcal ElectroCut Graphic Film Series 7725 is an approved cast alternative for permanent storefront lettering. 3M Scotchcal Opaque Graphic Film Series 100 is an approved cast alternative where a colourless adhesive and small-letter precision are required.
Key Specification Facts
- Lead film: Avery 900 Supercast, 50-micron cast PVC, permanent acrylic adhesive, long-life cut lettering and glass signage.
- Zone-based durability applies; Avery 900 Supercast Zone 1 figures must not be stated as Abu Dhabi life claims.
- 3M Scotchcal ElectroCut Series 7725 uses permanent adhesive and is not intended to be removed after installation.
- 3M Scotchcal Opaque Graphic Film Series 100 has a colourless adhesive suited to transparent glass substrates.
.jpg)
Pricing, Delivery Timeline and Warranty Coverage
Projects vary by specification, material finish, and site access conditions. The figures below are for budgeting guidance only. Final pricing, lead time, and warranty are confirmed after locking project scope, technical review, and TAMM permit sequencing.
Quoting & Price Ranges
- Total area and copy density: number of lines, letters, and graphic elements
- Material type and finish: solid-colour cast vinyl, metallic, or specialty finish
- Design complexity: logos, layered colours, fine detail, or reverse-cut lettering
- Installation height and access conditions: ground level, ladder, scaffold, or manlift
- Removal of existing lettering, adhesive residue, and surface preparation
- After-hours or phased installation coordination for occupied sites
Indicative Price Range in AED
145
-
385
SQM Supply and install
.svg)
Project Lead Time
Project timelines vary by copy density, layout complexity, and site access — including operating hours, height, and glass condition. Production starts after artwork approval; installation is scheduled around access windows and any building or security requirements.
Simple lettering on clean, accessible glass is typically completed within a single day. Dense copy, multi-panel layouts, or high-level installations require additional time, confirmed at survey.
- Simple single-panel lettering: often same-day installation on clean, accessible glass
- Dense copy, multi-panel, or layered vinyl: timeline confirmed at survey
- High-level or restricted-access installations: access coordination confirmed before scheduling
Warranty and Aftercare
12 Months for Second-surface applications
3 Months for first-surface applications
Warranty Covers
- Adhesion failure, edge lifting, or bubbling caused by installation defects
- Alignment, spacing, levelling, and clean trimming of installed lettering and decals
- Failure of individual letters or cut elements within the approved application scope
- Material performance under normal use within the rated application and environment
Exclusions
Damage after handover, impact or abrasion, cleaning chemicals, moisture ingress from substrate issues, and removal or re-application by others.
Technical Specifications — Cut Vinyl Lettering & Decals
- Film Construction — Lead is Avery 900 Supercast, a 50-micron cast PVC with permanent acrylic adhesive. 3M Scotchcal ElectroCut Series 7725 is an approved cast alternative with permanent adhesive and same-colour-both-sides construction. 3M Scotchcal Opaque Graphic Film Series 100 is an approved cast alternative with colourless adhesive for transparent substrates.
- Adhesive and Removability — Avery 900 Supercast has permanent acrylic adhesive. 3M ElectroCut Series 7725 is permanent and not intended to be removed — removal may leave residue or damage the glass. 3M Series 100 is removable with heat and/or chemicals. 3M Series 50/SC50 has fair removability with heat and chemicals.
- Zone Durability — Avery 900 Supercast: up to 12 years B&W, up to 10 years colors — Zone 1 values; Abu Dhabi performance reduced further. 3M Series 100: white/black Zone 3 = 8 years; colors Zone 3 = 6 years. 3M SC50: white/black Zone 3 = 4 years; colors Zone 3 = 4 years.
- Film Grade and Application Scope — Cast films — Avery 900 Supercast, 3M ElectroCut 7725, and 3M Series 100 — suit long-life exterior glass lettering. Avery 800 Premium Cast is the approved secondary for medium-to-long life. Film grade is confirmed per project based on service life, sun exposure, and glass condition.
- Medium-Term Value Films — Avery 700 Premium Film is 64-micron polymeric calendered PVC — Zone 1: B&W up to 8 years, all colours up to 7 years; reduced in Abu Dhabi. 3M SC50 is 75-micron polymeric calendered — Zone 3: white/black and colours at 4 years. Neither replaces cast film as the exterior lettering default.
Where Window Cut Vinyl Lettering & Decals Work Best
- Retail shopfronts — Business owners in Khalifa City, Al Raha, and Mohammed Bin Zayed City apply trading hours, store names, and logo marks to shopfront glass. Cut vinyl places information on the glass without a background film, preserving the open storefront view. Printed stickers with a visible carrier produce a noticeably different finish at close range.
- Corporate office entrance glazing — Fit-out managers on Al Reem Island and Al Maryah Island specify cut lettering for company names on entrance doors, department labels on partitions, and room identification on glazing. Each character is applied independently, allowing selective replacement without disturbing surrounding lettering.
- Clinic and professional practice frontages — Clinics and professional practices on public-facing glass apply practice names, registration details, and door information as cut vinyl. Second-surface placement protects lettering from cleaning contact while keeping it readable from outside.
- Mall units and managed property glazing — Mall tenants and managed-property occupants apply trading hours and regulatory notices to glass entry doors within landlord and building management approval frameworks. Cut vinyl is scoped to the glass panel without overlap into managed surfaces.
- Interior wayfinding and room identification — Reception areas, lobbies, and glazed partitions carry directional labels, floor numbers, and room names as cut vinyl. No overlaminate or background film is required.
The Commercial Case for Cut Vinyl Lettering & Decals
- No-background-film aesthetic — Cut vinyl places only the character or shape on the glass — no carrier film, no visible edge. The result reads as direct lettering rather than an applied sticker, which matters on entrance doors and reception glazing where the standard of finish is part of the brand statement.
- Selective character replacement — Individual letters, words, or lines can be removed and replaced without disturbing the rest of the installation. Trading hours, phone numbers, and pricing can be updated without reprinting the full panel — relevant for multi-branch rollouts and tenanted commercial properties.
- Cast film longevity for Abu Dhabi exterior — Long-life exterior glass lettering requires cast film. Avery 900 Supercast and 3M Series 100 are specified where UAE sun exposure, glass condition, and service life demand durable adhesive and dimensional stability. Calendered films are appropriate for interior or shorter-term applications only.
- Permit and compliance sequencing — Street-facing glass lettering in Abu Dhabi may require permit submission via the TAMM portal under DMT Version 5. Coverage dimensions, bilingual content, and frontage-percentage limits must be resolved at design stage before production begins on any public-facing glazing.
- Multi-site installation footprint — Cut vinyl lettering on ground-level glass has a compact installation footprint and can be scheduled across multiple branches or panels in a single day. This suits coordinated rollouts across retail chains and multi-tenancy commercial developments across Abu Dhabi.
- Adhesive selection and lease-end planning — Adhesive permanence varies by film. 3M Series 100 is removable with heat and chemicals. 3M Series 50/SC50 has fair removability. Avery 900 Supercast and 3M ElectroCut 7725 carry permanent adhesive — removal requirements must be factored into lease-end planning before specification.
Complete the Window Branding Scope
Cut vinyl lettering handles the essential identity layer on glass. To address all glazing needs on the same site — promotional coverage, full-surface branding, or privacy — integrate it with opaque blockout film for promotional panels, optically clear film for logo graphics, and frosted film for privacy zones.
.webp)
.jpg)
Frequently Asked Questions
Common inquiries about our products covering pricing, warranty and installation in Abu Dhabi.
Will the film edges show once the lettering is installed?
No background film is used. Only the cut character or shape adheres to the glass, applied via transfer tape which is removed after installation. The glass surface around each letter remains fully open. There are no visible borders or carrier areas — the lettering reads as direct-to-glass marks rather than applied stickers. Full-pane edge-to-edge coverage is not required; each letter is independent.
Can cut vinyl be removed without damaging the glass?
Removability depends on the film specified. 3M Scotchcal Opaque Graphic Film Series 100 is removable with heat and/or chemicals. 3M Series 50/SC50 has fair removability with heat and/or chemicals. Avery 900 Supercast carries permanent acrylic adhesive. 3M ElectroCut Series 7725 is not intended to be removed — removal may leave adhesive residue or damage the substrate. Confirm adhesive type and removal plan before specification.
Can individual letters be replaced independently?
Yes. Each character is installed independently, which means single letters, words, or lines can be removed and replaced without disturbing the rest of the window layout. This makes cut vinyl practical for selective updates — trading hours, phone numbers, or pricing — without reprinting or re-laying the full installation. Replacement characters are produced and matched against the existing specification.
Does street-facing glass lettering require a permit in Abu Dhabi?
Street-facing glass lettering on commercial frontages in Abu Dhabi may require permit submission via the TAMM portal under the DMT Version 5 signage framework, depending on coverage area and site type. For glazing within managed properties — mall units and multi-tenancy developments — landlord or building management NOC is also required before permit submission. Coverage dimensions must be confirmed before production begins.